Products
Browse PHYWE Sound Generation & Propagation products. Click any product for full details and to request a quote.
Acoustics
11061-02
Attachment for car
To hold measuring microphone (03542.00) or sound head (03524.00) on motor driven car (11061.00), e. g. for experiments on acoustic Doppler effect with...
Acoustics
03437-00
Bass bow
To stroke strings, tuning forks, tunefigure plates. Beech wood bow with horse hair.
Acoustics
03474-01
Charging strip
Charging strip for Kundt's tube to determine the sound wave length in air and other gases.
Acoustics
13289-30
Doppler source for TESS Acoustics
Acoustic source to demonstrate the Doppler effect. Integrated loudspeaker, 2 sinus tones with different frequencies selectable (audible and ultrasound...
Acoustics
06811-01
Earphones with 4mm-plugs
Electromagnetic earphones.Equipment and technical dataWith 4 mm plugs and connecting cable.Resistance : 7 Ω
Acoustics
13289-11
Frame drum, d = 20 cm
(no description provided)
Acoustics
64736-00
Glass plate, 120x60x2 mm
(no description provided)
Acoustics
13289-20
Glass tube, d(outside) = 44 mm, l = 340 mm
Glass tube, can be used in acoustics to measure resonance and standing waves Transparent Due to the dimensions, standing waves can be measured with a ...
Acoustics
65974-00
Headphone, stereo
Headphones with a large frequency range and closed ear cups; ideally suited for the determination of auditory threshold and for receiving curves of au...
Acoustics
03429-00
Impact hammer, rubber
To strike a tuning folk to produce a sound of certain frequency.
Acoustics
03475-88
Kundt's apparatus
To measure the length of acoustic waves in air or other gases. Glass tube with charging strip and piston. Length: 640 mm.
Acoustics
13765-00
Loudspeaker,8 Ohm/5 kOhm
Used in combination with a power frequency generator and LF amplifier. Permanent-dynamic system with supplementary high tune cone. The integrated tran...
Acoustics
03524-01
Loudspeaker / Sound head, 8 ohms
To be used as sound emitters in conjunction with frequency generators (13650-93, 13652-93 or 13654-99) and as a receiver in combination with low-frequ...
Acoustics
13289-16
Metal angle bracket for glass tube o.d. = 44 mm
Part of student monochord kit 13289-15
Acoustics
03073-00
Metronome
Mechanical clocking device. Scale for adjustment of tact frequency. Frequency range: 40...208 beats per minute. With clockwork. Hardwood casing, brown...
Acoustics
03430-00
Monochord
To investigate vibrations of strings and how the pitch of a tune depends on length, tension and thickness of the string. 2 strings on a resonator, ten...
Acoustics
03543-00
PHYWE Measuring microphone with amplifier
Electret capsule with 1.5 m long cable suitable for special investigations, e.g. point shaped plotting of soundfields. Frequency range 30 Hz ... 20 kH...
Acoustics
03474-02
Piston
Piston for Kundt's tube to determine the sound wave length in air and other gases.
Acoustics
03426-00
Recording tuning fork, 100 Hz
With pointed writing pen, used to recordtuning fork oscillations, e. g. on a glass plate covered with powder or soot. Length: 370 mm. Accessories With...
Acoustics
03460-00
Resonance Apparatus/ Quincke tube
The Quincke resonance tube (resonance apparatus) is used to detect interference phenomena on standing sound waves. The equipment set consists of a res...
Acoustics
03460-88
Resonance Apparatus with Support Material
The Quincke resonance tube (resonance apparatus) is used to detect interference phenomena on standing sound waves. The equipment set consists of a res...
Acoustics
03427-01
Sliding weights for tuning forks, 2 pcs
For frequency variation of a 440 Hz tuning folk.
Acoustics
03478-00
Sound pattern plates
To demonstrate the shapes of natural oscillations of plates through visualisation of Chladni's sound figures. Oscillations shapes are visualised ...
Acoustics
15289-20
Stereo headset, on-ear, with microphone
Headphone with high-grade audio quality and microphone unit, with 3.5 mm stereo jack to connect to a PC. Frequency range: 10 to 24,000 Hz.
Acoustics
15289-10
Stereo loudspeakers to connect to a PC
Stereo loudspeaker to connect to a PC, with power supply via USB. Interface for 3.5 mm stereo jack. On/off switch and volume control.
Acoustics
03429-01
Striking hammer
To strike a tuning folk to produce a sound of certain frequency. Especially useable for frequencies over 1000 Hz.
Acoustics
03431-01
String tensioning device, w. stem
To fit strings in stand materials, e. g. the bench clamp -PASS- (02010.00).
Acoustics
13289-13
Styrofoam sphere with hook
(no description provided)
Acoustics
03423-00
Tuning fork,1700 Hz
Can be used e.g. to excite oscillations for the Kundt's tube. Light metal, with especially wide sound irradiating surface. Frequency: 1700 Hz. Le...
Acoustics
03427-00
Tuning fork, 440 Hz, on resonance box
Wooden resonator box, with particularly long lasting tune; tuning fork removable. With striking hammer. Dimensions of resonator box 180 × 90 × 50 mm L...
Acoustics
03424-00
Tuning fork 440 Hz
To create a sound of a certain frequency. Frequency: 440 Hz. Length: 120 mm.
Acoustics
03421-00
Tuning fork 880 Hz
(no description provided)
Acoustics
13289-00
Tuning fork with pen
To record the oscillation of a tuning fork on a piece of paper. The tuning fork has a frequency of about 20 Hz and oscillates visibly. The oscillation...
Acoustics
03417-00
Tuning forks,C-major scale
Set of 8 tuning forks to create sounds of certain frequencies. Frequencies: c = 256 Hz d' = 288 Hz e' = 320 Hz f' = 341 Hz g' = 38...
Acoustics
03418-00
Tuning forks on resonator boxes, set of 4 (major cord)
Set of 4 tuning forks (C major chord) on wooden resonator boxes. The four forks have the following frequencies: c' = 256 Hz e' = 322Hz g...
Ready to Equip Your Physics Lab?
Get a custom quote for your institution, curriculum alignment support, and grant assistance from AmSci's education specialists.
Contact AmSci Today →