Products
Browse PHYWE Fabric & Material Properties products. Click any product for full details and to request a quote.
Mechanics
03903-00
Aluminium column
To determine the density of different materials. With hole for hanging from a string. Dimensions (mm): 10 x 10 x 60.
Mechanics
03951-00
Balance pan, plastic
Plastic pan and aluminium hoop for beam balance. Pan diameter 106 mm Height of hoop 170 mm Mass 25 g
Mechanics
02049-00
Bolt with knife-edge
Functin and Applications Bolt for low friction support of e.g. a lever arm (02274.00). Knife edge made out of hardened triangular steel. Length of kni...
Mechanics
03611-00
Capillary tube
To demonstrate the capillary effect. 5 communicating glass tubes of different interior diameters on a round base. Capillary diameters (mm): 0.4; 0.8; ...
Mechanics
02300-01
Center-of-gravity plate
To explain the idea of centre of gravity and to determine the centre of gravity of a vertically supported irregular plate experimentally. Anodised alu...
Mechanics
11304-00
Cobra SMARTexperiment - Inclined plane
The inclined plane makes it possible to clearly investigate the composition and decomposition of forces digitally using the PHYWElab app. With this ex...
Mechanics
02214-00
Cubes, set of 8
To determine the densities of different materials by weighing. Materials: lead,iron, copper, brass, zinc, aluminium, vulcanite, wood. Volume: 1 cm3. S...
Mechanics
02201-00
Cursors, 1 pair
Pointer for measuring scales (02200-00, 03001-00 und 11200-17) made out of red plastic.
Mechanics
15510-01
DEMO advanced Mechanics 1 necessary acessories
The set contains all and consumables for DEMO advanced Physics Set Mechanics 1 (15510-88). The consumables are required for the initial order and can ...
Mechanics
15511-01
DEMO advanced Mechanics 2 necessary acessories
The set contains all and consumables for DEMO advanced Physics Set Mechanics 1 (15510-88). The consumables are required for the initial order and can ...
Mechanics
03013-00
Dial gauge 10/0.01 mm
Dial gauge for measurement of 1/100 Milimeter e.g. to determine the modulus of elasticity (Young's module) with revolving pointer. 1 mm travel pe...
Mechanics
18220-00
Falling ball viscometer
For the precise measurement of the viscosity of transparent Newtonian liquids in combination with a circulation thermostat. The fall time of a ball wi...
Mechanics
17570-00
Flat bars, set
Set of flat bars to determine the modulus of elasticity (Young's modulus). Set contains 7 precision flat rods with different dimensions of steel,...
Mechanics
02240-02
Friction block, large
Painted wooden block with holes for holding pin to attach slotted weights. To be used in friction experiments. Hook for spring balance on a front side...
Mechanics
02240-01
Friction block
Painted wooden block with holes for holding pin to attach slotted weights. To be used in friction experiments. Hook for spring balance on a front side...
Mechanics
03013-01
Holder for dial gauge
Holder for dial gauge (03013.00). Clamping by means of a knurled screw, fixing of articulation also by means of an own knurled screw. Rod diameter: 10...
Mechanics
03068-04
Holder for dynamometer
To hold all spring balances in different operating positions; takes spring balances with diameters up to 18 mm. With knurled screw and rod. Rod length...
Mechanics
03015-00
Knife-edge with stirrup
Fuction and Applications Clamp for definite loading of flat bars to determine the modulus of elasticity (Young's modulus). Steel knife-edge to be...
Mechanics
EAK-P-2800-A
Laser Distance Meter ~ 0,05 … 40 m
Laser-Distance-Meter up to 40 m with calculation of area and volume This professional laser distance meter with multiline LCD display and backlight is...
Mechanics
02228-05
Leaf spring attachment
Accessory for leaf springs to fix pens for recording oscillations.
Mechanics
02228-00
Leaf spring
To be used among others for bending experiments. Material: spring steel. With slotted ends. With holes for fixing a holding pin (03949.00) or a pen fo...
Mechanics
02274-00
Lever
Exactly counter balanced lever to investigate the lever principles, to assemble a beam balance or to perform equilibrium and pendulum experiments. Met...
Mechanics
03960-00
Lever
Lever rod for the investigation of the lever principles, to assemble a beam balance and for equilibrium and pendulum experiments. Metal rod with scale...
Mechanics
03001-00
Meter scale, l = 1000 mm
Wooden scale. One side with mm divisions the other with enhanced cm block subdivision. Every second dm with red background. Length: 1 m. Width: 27 mm....
Mechanics
03012-00
Micrometer screw gauge 0 - 25 mm
Micrometer with ratchet stop. Material: Stainless steel. Measuring range: 0...25 mm. Thread pitch: 10 mm. Reading: 0.01 mm.
Mechanics
02270-00
Moments disk
Disk to investigate general equilibrium conditions of a body submitted to forces and supported at its centre of gravity so that it can rotate. Metalli...
Mechanics
03962-00
Plate with scale
To indicate turns of scales, e. g. in the case of beam balance. Metal plate, circular sector scale with coarse and fine subdivision. Length of scale: ...
Mechanics
03963-00
Pointer for demonstration lever
Mechanics
03961-00
Pointer for lever
For example to assemble a beam balance. Length: 100 mm. Diameter: 2 mm.
Mechanics
02263-00
Rod for pulley
To hold movable pulley on the hook. Diameter: 10 mm. Length: 120 mm.
Mechanics
11301-01
Roller for inclined plane
Roller as device under test for experiments with the inclinied plane (11301.00). Axially symmetric. With two rear weigths which can be removed. Holder...
Mechanics
02159-00
Rollercoaster track, fix.magnet
For experiments on the law of conservation of energy. Flexible track with magnetic strip and a reinforced front edge. Length: 1 m. Width: 50 mm. Inclu...
Mechanics
18224-99
Rotational viscometer
The viscometer measures by means of the mechanical resistance of any liquid that acts in the opposite direction to the rotational movement of a spindl...
Mechanics
11200-17
Scale, l 1200 mm
Plastic measuring rod. One side with mm division, the other one with dm division Every second dm red coloured Length: 1200 mm Width: 27 mm Recommended...
Mechanics
02200-00
Scale, l = 750 mm, on rod
Wooden scale, one side with mm divisions, the other with enhanced cm block subdivision. Every second dm with red background. With rod. Length: 750 mm....
Mechanics
DID-76550
Set of cubes for density determination
This set consists of 3 cubes (PVC, Al, Fe) with a hook at its top side. For experiments relating to density and bouyant force. Dimensions (H x W x D):...
Mechanics
03903-01
Sinker, aluminum
For the measurement of buoyancy and determination of the density of solids during demonstration classes. With hook for hanging from a thread. Dimensio...
Mechanics
03929-00
Sliding weight
Weight to be set and slid along lever rod of the torsion apparatus.
Mechanics
02206-03
Slotted weight, silver bronze, 50 g
Slot weights with slot and hole suitable for weight plate 02204-01 Mass tolerance: +/- 1% Diameter: 28 mm
Mechanics
03017-00
Spherometer
Apparatus to measure thicknesses, elevation, recesses and curvature radii of lenses. Mounted on a tripod with three measureing points which form an eq...
Mechanics
03065-20
Spring balance holder
Holder for transparent spring balances up to 5 N with 4 mm plug. Adaptable to rod with hole (02036.01) or any other 4 mm hole.
Mechanics
03065-09
Spring balance,transp.,2N,non-adj
Spring balance for demonstration of the function and for quantitative determination of forces. In transparent casing with eye and load hook Colour cod...
Mechanics
03065-01
Spring balance, transparent, 0,2N
Spring balance for quantitative determination of forces and for demonstration of the function. In transparent casing with eye and load hook. Colour co...
Mechanics
03065-02
Spring balance,transparent, 1 N
Spring balance for quantitative determination of forces and for demonstration of the function. In transparent casing with eye and load hook. Colour co...
Mechanics
03065-05
Spring balance,transparent, 10 N
Spring balance for quantitative determination of forces and for demonstration of the function. In transparent casing with eye and load hook. Colour co...
Mechanics
03065-07
Spring balance,transparent, 100 N
Spring balance for quantitative determination of forces and for demonstration of the function. In transparent casing with eye and load hook. Colour co...
Mechanics
03065-03
Spring balance,transparent, 2 N
Spring balance for quantitative determination of forces and for demonstration of the function. In transparent casing with eye and load hook. Colour co...
Mechanics
03065-06
Spring balance,transparent, 20 N
Spring balance for quantitative determination of forces and for demonstration of the function. In transparent casing with eye and load hook. Colour co...
Mechanics
03065-04
Spring balance,transparent, 5 N
Spring balance for quantitative determination of forces and for demonstration of the function. In transparent casing with eye and load hook. Colour co...
Mechanics
03913-00
Steel Column nickel-plated
To determine the density of different materials. With hole for hanging from a string. Material: Steel (97%). Nickel-plated to avoid rusting. Dimension...
Mechanics
02036-01
Support rod with hole, stainless steel, 10 cm
E. g. fitting to spring balance holder (03065.20). Polished and massive. Length: 100 mm. Diameter: 10 mm. With transverse hole.
Mechanics
17547-00
Surface tension measuring ring
To measure the surface tension of liquids. In storage box. Diameter of the ring: 19.5 mm.
Mechanics
02156-00
Syringe holder on fixing magnet
Support plate on two fixing magnets to ensure firm support for gas syringes which can be subjected to loads up to 20 N.
Mechanics
18220-02
Thermometer, 24...+ 51 ºC, for Falling ball viscometer
(no description provided)
Mechanics
02421-88
Torsion apparatus, complete
To investigate deformations due to torques. For demonstration of the combined effects of force and lever.
Mechanics
02421-00
Torsion apparatus
Apparatus for fixation of torsion rods. Lever arm length: 370 mm Scale diameter: 300 mm Scale division: 0...±180°
Mechanics
02416-00
Torsion dynamometer, 0.01 N
Torsion dynamometer to measure small forces or investigate electrostatic and magnetic interactions between bodies. Force compensation Zero point adjus...
Mechanics
03069-03
Torsion dynamometer
To measure forces in the course of experiments on the physics demonstration board. Circular dynamometer with a fixing magnet and handles to attach it ...
Mechanics
02421-04
Torsion rod, Al, l = 300 mm, d = 2 mm
Torsion rod for the torsion apparatus (02421.00). On the ends with a plug connection for the torsion apparatus and a metal cylinder. Material: alumini...
Mechanics
02421-03
Torsion rod, Al, l = 400 mm, d = 2 mm
Torsion rod for the torsion apparatus (02421.00). On the ends with a plug connection for the torsion apparatus and a metal cylinder. Material: alumini...
Mechanics
02421-02
Torsion rod, Al, l = 500 mm, d = 2 mm
Torsion rod for the torsion apparatus (02421.00). On the ends with a plug connection for the torsion apparatus and a metal cylinder. Material: alumini...
Mechanics
02421-05
Torsion rod, Al, l = 500 mm, d = 3 mm
Torsion rod for the torsion apparatus (02421.00). On the ends with a plug connection for the torsion apparatus and a metal cylinder. Material: alumini...
Mechanics
02421-06
Torsion rod, Al, l = 500 mm, d = 4 mm
Torsion rod for the torsion apparatus (02421.00). On the ends with a plug connection for the torsion apparatus and a metal cylinder. Material: alumini...
Mechanics
02421-07
Torsion rod, brass, l = 500 mm, d = 2 mm
Torsion rod for the torsion apparatus (02421.00). On the ends with a plug connection for the torsion apparatus and a metal cylinder. Material: brass. ...
Mechanics
02421-08
Torsion rod, Cu, l = 500 mm, d = 2 mm
Torsion rod for the torsion apparatus (02421.00). On the ends with a plug connection for the torsion apparatus and a metal cylinder. Material: copper....
Mechanics
02421-01
Torsion rod, steel, l = 500 mm, d = 2 mm
Torsion rod for the torsion apparatus (02421.00). On the ends with a plug connection for the torsion apparatus and a metal cylinder. Material: steel. ...
Mechanics
02151-05
Track holder on fixing magnet
Holder for track. Two track holders arerequired for fixing the track. Holdingforce 10 N.
Mechanics
02204-01
Weight holder, 10 g
Weight plate with rod and hook for placing the slotted weights Mass: 10 g tolerance: ± 1 % Diam. rod: 4 mm Diam. slotted weight: 28mm Can be used with...
Mechanics
05938-00
Wood column
For density determination. With hole for string suspension. Dimensions (mm): 10 x 10 x 60.
Ready to Equip Your Physics Lab?
Get a custom quote for your institution, curriculum alignment support, and grant assistance from AmSci's education specialists.
Contact AmSci Today →