American Scientific, LLC · Columbus, Ohio · Exclusive U.S. Distributor of PHYWE Systems
American Scientific, LLC · Columbus, Ohio · Exclusive U.S. Distributor of PHYWE Systems
Fabric & Material Properties equipment from the PHYWE Mechanics range. 71 products, 110V/60Hz adapted for U.S. labs.
To determine the density of different materials. With hole for hanging from a string. Dimensions (mm): 10 x 10 x 60.
Plastic pan and aluminium hoop for beam balance.
Functin and Applications Bolt for low friction support of e.g. a lever arm (02274.00). Knife edge made out of hardened triangular steel. Length of knife edge: 20 mm. Bolt diameter: 10 mm.
Capillary tube, supplied in the U.S. by American Scientific. Contact us for specifications.
To explain the idea of centre of gravity and to determine the centre of gravity of a vertically supported irregular plate experimentally.
You cannot use the item without these accessories!
To determine the densities of different materials by weighing.
Pointer for measuring scales (02200-00, 03001-00 und 11200-17) made out of red plastic.
The set contains all necessary accessories and consumables for DEMO advanced Physics Set Mechanics 1 (15510-88). The consumables are required for the initial order and can be reordered.
The set contains all necessary accessories and consumables for DEMO advanced Physics Set Mechanics 1 (15510-88). The consumables are required for the initial order and can be reordered.
Demo Beginner Applied Sciences Set Water, supplied in the U.S. by American Scientific. Contact us for specifications.
Dial gauge for measurement of 1/100 Milimeter e.g. to determine the modulus of elasticity (Young's module) with revolving pointer.
For the precise measurement of the viscosity of transparent Newtonian liquids in combination with a circulation thermostat.
Set of flat bars to determine the modulus of elasticity (Young's modulus). Set contains 7 precision flat rods with different dimensions of steel, brass and aluminium.
Painted wooden block with holes for holding pin to attach slotted weights. To be used in friction experiments.
Painted wooden block with holes for holding pin to attach slotted weights. To be used in friction experiments.
Holder for dial gauge (03013.00). Clamping by means of a knurled screw, fixing of articulation also by means of an own knurled screw. Rod diameter: 10 mm.
To hold all spring balances in different operating positions; takes spring balances with diameters up to 18 mm. With knurled screw and rod. Rod length: 90 mm. Rod diameter: 10 mm.
Clamp for definite loading of flat bars to determine the modulus of elasticity (Young's modulus).
This professional laser distance meter with multiline LCD display and backlight is specifically designed for distance measurements of high accuracy and faraway, hard to reach places.
Accessory for leaf springs to fix pens for recording oscillations.
To be used among others for bending experiments.
Exactly counter balanced lever to investigate the lever principles, to assemble a beam balance or to perform equilibrium and pendulum experiments.
Lever rod for the investigation of the lever principles, to assemble a beam balance and for equilibrium and pendulum experiments. Metal rod with scale subdivisions every 20 mm. 20 equidistant pins to
Meter scale, l = 1000 mm, supplied in the U.S. by American Scientific. Contact us for specifications.
Micrometer with ratchet stop. Material: Stainless steel. Measuring range: 0...25 mm. Thread pitch: 10 mm. Reading: 0.01 mm.
Disk to investigate general equilibrium conditions of a body submitted to forces and supported at its centre of gravity so that it can rotate.
Phywe Demo Physics Board With Stand, supplied in the U.S. by American Scientific. Contact us for specifications.
To indicate turns of scales, e. g. in the case of beam balance.
(no description provided)
For example to assemble a beam balance. Length: 100 mm. Diameter: 2 mm.
To hold movable pulley on the hook. Diameter: 10 mm. Length: 120 mm.
Roller as device under test for experiments with the inclinied plane (11301.00).
For experiments on the law of conservation of energy.
The viscometer can be adapted to a wide variety of environments. The viscometer can be leveled using the height-adjustable feet so that the measuring spindle is always vertical in the medium to be...
Plastic measuring rod. One side with mm division, the other one with dm division Every second dm red coloured Length: 1200 mm Width: 27 mm Recommended accessories Two red plastic cursors (02201-00)
Wooden scale, one side with mm divisions, the other with enhanced cm block subdivision.
This set consists of 3 cubes (PVC, Al, Fe) with a hook at its top side. For experiments relating to density and bouyant force.
For the measurement of buoyancy and determination of the density of solids during demonstration classes. With hook for hanging from a thread. Dimensions (mm): 30 × 30 × 90. Mass: 220 g.
Weight to be set and slid along lever rod of the torsion apparatus.
Slotted weight, silver bronze, 50 g, supplied in the U.S. by American Scientific. Contact us for specifications.
Apparatus to measure thicknesses, elevation, recesses and curvature radii of lenses.
Holder for transparent spring balances up to 5 N with 4 mm plug. Adaptable to rod with hole (02036.01) or any other 4 mm hole.
Spring balance for demonstration of the function and for quantitative determination of forces.
Spring balance for quantitative determination of forces and for demonstration of the function.
Spring balance for quantitative determination of forces and for demonstration of the function.
Spring balance for quantitative determination of forces and for demonstration of the function.
Spring balance for quantitative determination of forces and for demonstration of the function.
Spring balance for quantitative determination of forces and for demonstration of the function.
Spring balance for quantitative determination of forces and for demonstration of the function.
Spring balance for quantitative determination of forces and for demonstration of the function.
To determine the density of different materials. With hole for hanging from a string. Material: Steel (97%). Nickel-plated to avoid rusting. Dimensions (mm): 10 x 10 x 60.
E. g. fitting to spring balance holder (03065.20). Polished and massive. Length: 100 mm. Diameter: 10 mm. With transverse hole.
To measure the surface tension of liquids. In storage box. Diameter of the ring: 19.5 mm.
Support plate on two fixing magnets to ensure firm support for gas syringes which can be subjected to loads up to 20 N.
(no description provided)
To investigate deformations due to torques. For demonstration of the combined effects of force and lever.
Torsion apparatus, supplied in the U.S. by American Scientific. Contact us for specifications.
Torsion dynamometer to measure small forces or investigate electrostatic and magnetic interactions between bodies.
To measure forces in the course of experiments on the physics demonstration board.
Torsion rod for the torsion apparatus (02421.00). On the ends with a plug connection for the torsion apparatus and a metal cylinder. Material: aluminium. Diameter: 2 mm. Length: 300 mm.
Torsion rod for the torsion apparatus (02421.00). On the ends with a plug connection for the torsion apparatus and a metal cylinder. Material: aluminium. Diameter: 2 mm. Length: 400 mm.
Torsion rod for the torsion apparatus (02421.00). On the ends with a plug connection for the torsion apparatus and a metal cylinder. Material: aluminium. Diameter: 2 mm. Length: 500 mm.
Torsion rod for the torsion apparatus (02421.00). On the ends with a plug connection for the torsion apparatus and a metal cylinder. Material: aluminium. Diameter: 3 mm. Length: 500 mm.
Torsion rod for the torsion apparatus (02421.00). On the ends with a plug connection for the torsion apparatus and a metal cylinder. Material: aluminium. Diameter: 4 mm. Length: 500 mm.
Torsion rod for the torsion apparatus (02421.00). On the ends with a plug connection for the torsion apparatus and a metal cylinder. Material: brass. Diameter: 2 mm. Length: 500 mm.
Torsion rod for the torsion apparatus (02421.00). On the ends with a plug connection for the torsion apparatus and a metal cylinder. Material: copper. Diameter: 2 mm. Length: 500 mm.
Torsion rod for the torsion apparatus (02421.00). On the ends with a plug connection for the torsion apparatus and a metal cylinder. Material: steel. Diameter: 2 mm. Length: 500 mm.
Holder for track. Two track holders arerequired for fixing the track. Holdingforce 10 N.
Weight holder, 10 g, supplied in the U.S. by American Scientific. Contact us for specifications.
For density determination. With hole for string suspension. Dimensions (mm): 10 x 10 x 60.
